Title III of the ADA sets clear expectations for access: new buildings must meet accessibility standards, while alterations should improve access as far as feasible. Barrier removal, accessible routes, restrooms, and signage all matter; historic features may affect the work, but they don’t erase the duty to provide access.

Multiple Choice

Under Title III, which statement about construction and alteration requirements is accurate?

Under Title III, new construction must be accessible to people with disabilities, and when existing facilities are altered, barriers must be removed to the extent readily achievable, with accessible alternatives provided when removal isn’t feasible. This captures the practical approach: you design new builds to meet accessibility standards, and you make alterations to remove barriers as much as possible given feasibility. Historical significance or other constraints may affect how much accessibility can be added, but they do not make accessibility optional. Accessibility also covers more than just entrances; it includes routes, restrooms, signage, and other features as part of making a facility usable.

Accessibility is often decided long before anyone reaches a doorway. A building’s layout, routes, signs, restrooms, and service areas all shape whether people with disabilities can use it. Under Title III of the Americans with Disabilities Act (ADA), those details matter both when a facility is built and when it is changed later. The basic idea is clear: new construction should be accessible, while alterations should improve access as far as the work allows.

New buildings start with access in mind

Title III covers places of public accommodation and certain commercial facilities. A public accommodation can include a shop, restaurant, hotel, medical office, or theater. The law requires covered new construction to be readily accessible to and usable by people with disabilities, subject to its standards and limited exceptions.

That requirement affects more than the main entrance. A usable facility may need an accessible route from the site entrance or parking area, doors with suitable clear width, ramps or elevators where needed, accessible restrooms, and signs that convey information in usable ways. The details vary by building and its features, but the goal is broader than simply getting through the front door.

Good planning helps make access part of the design rather than a costly patch added later. For example, a designer can consider turning space in a restroom while setting the room’s layout, rather than trying to squeeze it in after construction. A clear route through a café can also help people using wheelchairs, parents with strollers, and staff moving supplies. Accessibility benefits people in different ways, often at the same time.

The ADA Standards for Accessible Design provide technical requirements for many features, including ramps, parking spaces, doorways, and toilet rooms. Architects, contractors, owners, and officials may also need to check applicable state and local codes. These rules can overlap, and a project’s location and scope matter. That’s why a simple-looking design choice can have legal and practical consequences.

Alterations are a chance to make access better

Buildings change. A store may move its checkout counter, a hotel may renovate guest rooms, or an office may rebuild its lobby. When a covered facility is altered, the altered portions generally must be made accessible to the maximum extent feasible, following the ADA’s applicable requirements.

“Maximum extent feasible” is not a license to ignore access because a project is inconvenient. It addresses situations where the nature of the existing structure makes full compliance technically infeasible—for instance, where structural conditions prevent a feature from meeting a particular requirement. Even then, the work must meet the standard as closely as the circumstances allow.

The scope of the work matters. If a renovation changes a space’s usability, accessibility requirements may apply to the altered area and, in some cases, to the route serving it. The ADA includes a path-of-travel requirement for alterations to a primary function area, such as a sales floor or professional office. That can mean improving the route to the area and related features such as restrooms or drinking fountains, subject to limits in the law and standards.

There is also a cost limit for certain path-of-travel work. In general, the cost of providing an accessible path and related facilities is capped at 20 percent of the cost of the alteration to the primary function area. That does not make access irrelevant when a project reaches the cap. The required work is considered in a defined order, and the specific rules can be technical. Project teams should review the applicable standards rather than assume that one budget figure settles every question.

An alteration should not reduce accessibility that already exists. If a doorway, route, or service counter is accessible before the work, a renovation should not make it less usable unless the law’s requirements and any applicable exceptions allow it. In plain terms, a remodel should move access forward, not quietly take it away.

Existing buildings have a separate duty

A building that predates the ADA is not automatically required to meet every new-construction standard in every detail. But that does not mean it can ignore accessibility. Title III generally requires a public accommodation to remove architectural barriers in existing facilities when doing so is “readily achievable”—that is, when removal is easily accomplishable without much difficulty or expense.

This is a separate duty from the requirements for new construction and alterations. It can apply even when an owner has no renovation underway. Possible steps might include rearranging furniture, installing a ramp, widening a doorway, or changing a service counter, depending on the site and the effort involved. The law calls for a fact-specific assessment. A small change may be readily achievable in one setting but far more difficult in another.

If removing a barrier is not readily achievable, a business may still need to offer its goods or services through alternative methods when those methods are readily achievable. For instance, staff might bring items to a customer in an accessible part of a shop if the sales floor cannot reasonably be modified. An alternative should provide meaningful access; it is not a reason to leave a person stranded at the entrance.

These requirements can sound like a maze of similar phrases. The distinction helps: new construction must meet accessibility requirements; alterations must meet them to the maximum extent feasible; existing facilities must remove barriers when readily achievable. Each rule looks at a different situation, so the right analysis depends on what is being built, changed, or maintained.

History and structural limits don’t erase access

Historic properties may raise special concerns. Title III provides specific treatment for certain historic facilities, including properties listed in or eligible for listing in the National Register of Historic Places, or designated as historic under state or local law. The goal remains access, but the work must also avoid threatening or destroying the property’s historic significance. Relevant accessibility standards and consultation with appropriate preservation authorities can help guide the project.

That balance is important. A historic designation does not make accessibility optional across the board. It may affect how access is provided—for example, by shaping the route or the type of modification—while still calling for access to the facility’s goods and services where required. A thoughtful plan can respect a building’s character without treating disabled visitors as an afterthought.

Structural constraints also need careful attention. A narrow stairway or an unusual floor plan may make some changes difficult, but “difficult” and “impossible” are not interchangeable. Teams should identify the specific barrier, consider workable design alternatives, and document why a requirement cannot be met when technical infeasibility applies. That process leads to better decisions than a broad claim that an old building cannot be changed.

Access is a whole-building issue

It’s easy to focus on the most visible feature, such as a ramp at the entrance. Yet access depends on the whole trip: arriving from parking or public transit, entering the building, moving between spaces, finding information, using a restroom, and receiving the same service as other customers.

Small design choices can shape that experience. A sign placed where it can be seen and read, a clear path around displays, or a door that is easy to open can make a real difference. These features also help people with temporary injuries, older adults, and caregivers—though the ADA’s purpose is to protect the rights of people with disabilities.

For building owners and project teams, the practical lesson is to bring accessibility into planning early. Review the building’s current features, identify what the project will change, and check the standards that apply to that work. When uncertainty remains, qualified design professionals and legal advisers can help interpret the requirements. A little attention at the start can prevent expensive revisions later.

The ADA’s approach is not that every existing building must instantly become perfect, nor that access can wait until a convenient moment. It sets different duties for new construction, alterations, and existing facilities, while keeping the same central aim: people with disabilities should be able to use public spaces and services with dignity. That aim belongs in the plans, not just in the doorway.